>
 

  • ARE DIFFERENT BARREL LENGTHS AVAILABLE?
    a. Shorter barrel lengths are available down to 16 1/2 inches long at an additional charge of $100.00.

  • CAN YOU SEND ME A PRINTED CATALOG?
    a. We do not have a printed catalog, for the most up to date product information just print the web pages describing the 50 BMG AR15 CONVERSION.

  • DO I HAVE TO UNHINGE THE CONVERSION EVERYTIME I SHOOT TO LOAD AND UNLOAD THE RIFLE?
    a. Unlike some other products in the market you don't have any awkward opening and closing of the upper and lower receiver to merely fire a round. With the ALS 50 BMG CONVERSION you load live ammunition and remove fired cases through the side port like a real rifle, WITHOUT having to unhinge the Action.
    And you can REMOVE a loaded round of ammunition WITHOUT having to unhinge the action and remove the bolt from the ALS 50 BMG CONVERSION, making it perfect for military and law enforcement applications.


  • DO I NEED AN FFL TO ORDER?
    a. No FFL is required to purchase or own the 50 BMG AR15 CONVERSION because it is not considered a firearm. It is designed to be used with any existing AR15 or M16 as a replacement for the standard .223 upper receiver.

  • DOES IT HAVE AN EXTRACTOR AND EJECTOR?
    a. Unlike other products in the market the 50 BMG AR15 CONVERSION uses a heat treated traditional Mauser style bolt face and lugs with a hardened steel extractor and ejector.

  • HOW DOES THE BIPOD MOUNT ONTO THE CONVERSION?
    a. The bipod assembly mounts directly to the barrel shroud with two small bolts.

  • HOW EXACTLY DOES IT ATTACH?
    a. The upper receiver of your AR15 or M16 is removed and the 50 BMG AR15 CONVERSION is attached like any standard .223 upper receiver using the existing push pins, no extra parts or tools required to assemble or fire the completed weapon.


  • IS THE 50 BMG CONVERSION JUST A COPY OF ANOTHER 50 BMG GUN?
    a. The 50 BMG CONVERSION is a completely unique weapon design and is U.S. PATENT PENDING. It was engineered from the ground up in the tradition of American gun manufactures, with technical support from a Department of Defense contractor specialized in antipersonnel munitions and weapon systems ranging to 120mm.

  • IS THE RECEIVER MADE FROM PIECES OF PIPE OR TUBING?
    a. All 50 BMG AR15 CONVERSION receivers and components are precision machined from solid steel and each conversion is hand fitted to the highest match grade tolerances. Unlike some low-end products seen in the market there is no plumbing pipe or muffler tubing used in receiver and barrel components, and there are no screws, bolts, rivets, or spot welds used to hold it together.


  • WHAT ABOUT RECOIL?
    a. The recoil is transmitted directly to the stock through the ZERO clearance upper and lower receiver interface, there is NO recoil stress applied to the assembly push pins.

  • WHAT KIND OF AR15 WILL THE CONVERSION FIT?
    a. The 50 BMG AR15 CONVERSION will fit any AR15 or M16 rifle with a military specification small pin lower receiver, i.e. the front pin is the same size as the rear pin and the upper receiver completely separates from the lower receiver.

  • WHAT KIND OF CHAMBERS ARE AVAILABLE?
    a. We have available the standard match chamber and the standard military chamber.

  • WILL THE CONVERSION FIT AN AR10?
    a. The 50 BMG AR15 CONVERSION will not fit an AR10 .308 caliber rifle. It will fit the Armalite M15A2 and A4 .223 caliber rifles with military specification small pin lower receivers, i.e. the front pin is the same size as the rear pin and the upper receiver completely separates from the lower receiver.

  • WILL THE MODIFIED JARD TRIGGER WORK WITH AN AR15 UPPER?
    a. Once installed the Jard trigger will work with either the 50 BMG AR15 CONVERSION or the standard .223 upper receiver.

  • WILL THE RECOIL DAMAGE MY LOWER RECEIVER?
    a. The 50 BMG AR15 CONVERSION upper receiver is designed for a ZERO clearance fitting to your lower receiver. All recoil not compensated for by the muzzle brake is transferred directly to the shoulder stock by coaxial kinetic impulse through the lower receiver extension boss. The 50 BMG AR15 CONVERSION has been fired thousands of times on the same AR lower receiver with NO DAMAGE being done. We do not recommend using pre-ban lower receivers based purely on their higher market value.

  • WILL THE SYNTHETIC STOCK OR LAMINATED WOOD WORK ON AN ARMALITE AR-10?
    a. The synthetic and laminated wood stocks will only fit small pin AR-15/M-16 rifles or their copies.

  • WILL THE SYNTHETIC THUMBHOLE STOCK WORK WITH OTHER 50 BMG CONVERSIONS?
    a. Our synthetic thumbhole stock will work with any other 50 BMG aftermarket conversions for the AR15/M16 rifle.










  
 Home  About Us  Contact Us  Products    FAQ 
© 2014 Advanced Long-range Systems, LLC - All Rights Reserved